Slurry Pump Part - Rubber Impeller

Basic Part Number 147 (5VCG - 5 Vanes Closed Impeller)

Molded elastomer type interchangeable with hard metal impeller.
The contour of the trailing edge of the impeller vanes, in conjunction with front and back side sealing vanes, and the volute design work to minimize recirculation and reduce the stuffing box pressure. Reduced stuffing box pressure prolongs life of shaft sleeve and gland packings.
A three piece segmented release collar provides a positive means for easy removal of large impellers (“F” bearings frames and larger).
Impeller clearance adjustment is done externally by loosening two hold-down bolts on the bearing housing and then adjusting two locator nuts.
Abrasion&corrosion resistant natrual rubber or synthetic elastomers.

PART NAME	PART NUMBER	MATL	PUMP SERIES	PUMP SIZE
IMPELLER	C2147	R55	AH	3X2
IMPELLER	D3147	R55	AH	4X3
IMPELLER	E4147	R55	AH	6X4
IMPELLER	F6147	R55	AH	8X6
IMPELLER	F8147	R55	M	10X8
IMPELLER	F10147	R55	M	12X10
IMPELLER	FAM8147	R55	AH	10X8
IMPELLER	FAM10147	R55	AH	12X10
IMPELLER	FAM10147RE1M	R55	AH	12X10
IMPELLER	FAM12147	R55	AH	14X12
IMPELLER	G8147	R55	AH	10X8
IMPELLER	G10147	R55	AH	12X10
IMPELLER	G10147RE1	R55	AH	12X10
IMPELLER	G12147	R55	AH	14X12
IMPELLER	GAM14147	R55	AH	16X14
IMPELLER	TU18147	R55	AH	20X18
IMPELLER	RSL30147	R55	L	300
IMPELLER	SL30147	R55	L	300
IMPELLER	SL35147	R55	L	350
IMPELLER	STL40147	R55	L	400
IMPELLER	STL45147	R55	L	450
IMPELLER	TL50147	R55	L	500
IMPELLER	TUL55147	R55	L	550
IMPELLER	UL65147	R55	L	650